Click

DRIVERS FOR STREET & FLOOD LIGHTS

(Open Frame)

2402- up to 24W

Lower wattage outdoor lights are mostly powered by indoor light drivers, which makes it non-reliable and unsafe to use. To offer a more reliable solution, we developed a new driver with on-board surge capacity of 5KV and wide operating voltage range up to 440VAC.

LED
  1. Dimensions Open Frame: 71mm X 41mm X 23mm
  2. Dimensions With Cabinet: 90mm X 43mm X 28mm
  3. Wide input range: 100 to 320VAC
  4. High voltage cutoff: @ 325VAC & Reconnect @ 205VAC
  5. Maximum Voltage Sustainable: 440VAC
  6. Surge test: 5KV, in common and differential mode
  7. High-pot test: 3.78KV @ Input & Output, 1.5KV @ power & ground
  8. Power factor: greater than .95
  9. THD: less than 10%
  10. Efficiency: >87% at complete input range
  11. Other Protections: OVP, Short Circuit Protection
  12. Current accuracy: ±2.5%
  13. Capacitors used: 105°C 10000hrs
  14. Thermal switch Used: 90°C
  15. Rating Available: 300mA, 350mA, 600mA & 700mA

2459- up to 32W

Packed in a small form factor, practically designed for both street lighting and flood lighting application, this product offers more reliability and safety against surges. This next generation model offers more flexibility in wattages and current.

LED
  1. Dimensions Open Frame: 74mm X 41mm X 25mm
  2. Dimensions With Cabinet: 90mm X 42mm X 29mm
  3. Wide input range: 100 to 320VAC
  4. High voltage cutoff: @ 335VAC & Reconnect @ 310VAC
  5. Low Voltage cutoff: @ 90VAC & Reconnect @ 110VAC
  6. Maximum Voltage Sustainable: 440VAC
  7. Surge test: 5KV, in common and differential mode
  8. High-pot test: 3.78KV @ Input & Output, 1.5KV @ power & ground
  9. Power factor: greater than .95
  10. THD: less than 10%
  11. Efficiency: >87% at complete input range
  12. Other Protections: OVP, Short Circuit Protection
  13. Current accuracy: ±2.5%
  14. Capacitors used: 105°C 10000hrs
  15. Thermal switch Used: 90°C
  16. Rating Available: 450mA, 600mA, 700mA & 850mA

1964- up to 45watts

One of the smallest LED Driver in this power rating, equipped with both high cut off and low cut off, it provides extra safety and performance than any other driver in this category.

LED
  1. Dimensions Open Frame: 71mm X 51mm X 25mm
  2. Dimensions With Plate: 86mm X 53mm X 30mm
  3. Wide input range: 100 to 320VAC
  4. High voltage cutoff: @ 325VAC & Reconnect @ 310VAC
  5. Low Voltage cutoff: @ 120VAC & Reconnect @ 140VAC
  6. Maximum Voltage Sustainable: 440VAC
  7. Surge test: 5KV, in common and differential mode
  8. High-pot test: 3.78KV @ Input & Output, 1.5KV @ power & ground
  9. Power factor: greater than .95
  10. THD: less than 10%
  11. Efficiency: >87% at complete input range
  12. Other Protections: OVP, Short Circuit Protection
  13. Current accuracy: ±2.5%
  14. Capacitors used: 105°C 10000hrs
  15. Rating Available: 350mA, 600mA, 700mA, 850mA, 900mA, 1Amp & 1.2Amp

2164- up to 45watts

Round LED drivers are not common, and our round LED driver is equipped with EMI/EMC, high voltage cut off, and 5KV surge immunity.

LED
  1. Dimensions: 70mm (Diameter) X 36mm (H)
  2. Wide input range: 100 to 320VAC
  3. High voltage cutoff: @ 325VAC & Reconnect @ 305VAC
  4. Maximum Voltage Sustainable: 440VAC
  5. Surge test: 5KV, in common and differential mode
  6. High-pot test: 3.78KV @ Input & Output, 1.5KV @ power & ground
  7. Power factor: greater than .95
  8. THD: less than 10%
  9. Efficiency: >87% at complete input range
  10. Other Protections: OVP, Short Circuit Protection
  11. Current accuracy: ±2.5%
  12. Capacitors used: 105°C 10000hrs
  13. Rating Available: 350mA, 600mA, 700mA, 850mA, 900mA, 1Amp & 1.2Amp

1165- up to 60watts

New design for higher wattage application, with reducing sizes of fixtures and increasing thermal problems, we have added a thermal switch in this new model, which controls and maintains the temperature of fixture and driver, making a reliable product that lasts long.

LED
  1. Dimensions Open Frame: 93mm X 54mm X 29mm
  2. Dimensions With Cabinet: 105mm X 55mm X 33mm
  3. Wide input range: 100 to 320VAC
  4. High voltage cutoff: @ 335VAC & Reconnect @ 310VAC
  5. Low Voltage cutoff: @ 90VAC & Reconnect @ 110VAC
  6. Maximum Voltage Sustainable: 440VAC
  7. Surge test: 5KV, in common and differential mode
  8. High-pot test: 3.78KV @ Input & Output, 1.5KV @ power & ground
  9. Power factor: greater than .95
  10. THD: less than 10%
  11. Efficiency: >87% at complete input range
  12. Other Protections: OVP, Short Circuit Protection
  13. Current accuracy: ±2.5%
  14. Capacitors used: 105°C 10000hrs
  15. Thermal switch Used: 100°C
  16. Rating Available: 350mA, 600mA, 700mA, 850mA, 900mA, 1Amp & 1.2Amp

2503- up to and 50w and 60w

New linear design for flood lighting application available in both 50W and 60W. This new design is more economical and compact. Also powered with thermal switch for better thermal performance.

LED
  1. Dimensions Open Frame: 108mm X 39mm X 30mm
  2. Dimensions With Cabinet: 125mm X 40mm X 35mm
  3. Wide input range: 100 to 320VAC
  4. High voltage cutoff: @ 325VAC & Reconnect @ 305VAC
  5. Maximum Voltage Sustainable: 440VAC
  6. Surge test: 5KV, in common and differential mode
  7. High-pot test: 3.78KV @ Input & Output, 1.5KV @ power & ground
  8. Power factor: greater than .95
  9. THD: less than 10%
  10. Efficiency: >87% at complete input range
  11. Other Protections: OVP, Short Circuit Protection
  12. Current accuracy: ±2.5%
  13. Capacitors used: 105°C 10000hrs
  14. Rating Available: 500mA, 600mA, 700mA, 900mA, 1Amp, 1.2Amp & 1.5Amp

1961- up to 80watts

This wattage requires lot of attention on efficiency and form factor, a product of this high wattage is always more prone to higher temperatures which requires extra effort from our side to make a more reliable product, since driver is enclosed in a chamber inside the luminaire, it rarely has a chance of getting any thermal protection, so we have increased efficiency of our product which has made it cooler and reliable. Also, equipped with thermal switch.

LED
  1. Dimensions Open Frame: 101mm X 68mm X 33mm
  2. Dimensions With Cabinet: 119mm X 68mm X 35mm
  3. Wide input range: 100 to 320VAC
  4. High voltage cutoff: @ 335VAC & Reconnect @ 310VAC
  5. Low Voltage cutoff: @ 90VAC & Reconnect @ 110VAC
  6. Maximum Voltage Sustainable: 440VAC
  7. Surge test: 5KV, in common and differential mode
  8. High-pot test: 3.78KV @ Input & Output, 1.5KV @ power & ground
  9. Power factor: greater than .95
  10. THD: less than 10%
  11. Efficiency: >87% at complete input range
  12. Other Protections: OVP, Short Circuit Protection
  13. Current accuracy: ±2.5%
  14. Capacitors used: 105°C 10000hrs
  15. Rating Available: 700mA, 1Amp, 1.05Amp, 1.2Amp, 1.5Amp & 1.8Amp

1061- up to 90watts

This has been missing from our range from a very long time, as it is very difficult to pack all the components in this small form factor, but with ever increasing demand for higher wattage drivers we developed this product testing all crucial parameters, required to make it last long.

LED
  1. Dimensions Open Frame: 115mm X 66mm X 38mm
  2. Dimensions With Cabinet: 135mm X 67mm X 43mm
  3. Wide input range: 100 to 320VAC
  4. High voltage cutoff: @ 325VAC & Reconnect @ 305VAC
  5. Low Voltage cutoff: @ 100VAC & Reconnect @ 115VAC
  6. Maximum Voltage Sustainable: 440VAC
  7. Surge test: 5KV, in common and differential mode
  8. High-pot test: 3.78KV @ Input & Output, 1.5KV @ power & ground
  9. Power factor: greater than .95
  10. THD: less than 10%
  11. Efficiency: >87% at complete input range
  12. Other Protections: OVP, Short Circuit Protection
  13. Current accuracy: ±2.5%
  14. Capacitors used: 105°C 10000hrs
  15. Thermal switch Used: 100°C
  16. Rating Available: 700mA, 1Amp, 1.5Amp, 1.8Amp & 2Amp

2161- up to 90watts

A new round driver targeted specifically for high performance bay light section. Its an ideal solution for bay light used in heavy industry, warehouse, open house, etc. Equipped with all the essentials features of traditional LED driver, i.e. high voltage & low voltage cutoff, surge, high-pot, etc. we have use thermal switch to ensure the safety and long-lasting high performance of the driver and made the best from it.

LED
  1. Dimensions Open Frame: 108mm(dia) X 38mm
  2. Wide input range: 100 to 320VAC
  3. High voltage cutoff: @ 335VAC & Reconnect @ 310VAC
  4. Low Voltage cutoff: @ 100VAC & Reconnect @ 115VAC
  5. Maximum Voltage Sustainable: 440VAC
  6. Surge test: 5KV, in common and differential mode
  7. High-pot test: 3.78KV @ Input & Output, 1.5KV @ power & ground
  8. Power factor: greater than .95
  9. THD: less than 10%
  10. Efficiency: >87% at complete input range
  11. Other Protections: OVP, Short Circuit Protection
  12. Current accuracy: ±2.5%
  13. Capacitors used: 105°C 10000hrs
  14. Thermal switch Used: 100°C
  15. Rating Available: 700mA, 1Amp, 1.5Amp, 1.8Amp & 2Amp

3355- up to 120watts

Dual output drivers are out there for a very long time now, but mostly their sizes are bulky, making them impractical for today' applications, so we come up with a refreshing new size, that fits perfectly in smallest of housings. Also, it has unique feature to save it from higher voltages-mechanical RELAY. Having it on the driver for both high voltages cut and low voltage cut, it makes sense when you have a relay to block high voltages from damaging circuits.

LED
  1. Dimensions Open Frame: 119mm X 81mm X 29mm
  2. Dimensions With Cabinet: 136mm X 83mm X 35mm
  3. Wide input range: 100 to 320VAC
  4. High voltage cutoff: @ 335VAC & Reconnect @ 310VAC
  5. Low Voltage cutoff: @ 90VAC & Reconnect @ 112VAC
  6. Maximum Voltage Sustainable: 440VAC
  7. Surge test: 5KV, in common and differential mode
  8. High-pot test: 3.78KV @ Input & Output, 1.5KV @ power & ground
  9. Power factor: greater than .95
  10. THD: less than 10%
  11. Efficiency: >87% at complete input range
  12. Other Protections: OVP, Short Circuit Protection
  13. Current accuracy: ±2.5%
  14. Capacitors used: 105°C 10000hrs
  15. Thermal switch Used: 100°C
  16. Rating Available: 1.2Amp, 1.4Amp, 1.8Amp, 2Amp, 2.4Amp, 2.8Amp & 3Amp

3166- up to 120watts

For application where you need linear shapes, and square driver doesn't fit, we have designed this driver. It has a relay to protect it from high and low voltages and also has thermal switch to protect from higher temperatures.

LED
  1. Dimensions Open Frame: 181mm X 55mm X 29mm
  2. Dimensions With Plate: 201mm X 57mm X 34mm
  3. Wide input range: 100 to 320VAC
  4. High voltage cutoff: @ 335VAC & Reconnect @ 310VAC
  5. Low Voltage cutoff: @ 90VAC & Reconnect @ 110VAC
  6. Maximum Voltage Sustainable: 440VAC
  7. Surge test: 5KV, in common and differential mode
  8. High-pot test: 3.78KV @ Input & Output, 1.5KV @ power & ground
  9. Power factor: greater than .95
  10. THD: less than 10%
  11. Efficiency: >87% at complete input range
  12. Other Protections: OVP, Short Circuit Protection
  13. Current accuracy: ±2.5%
  14. Capacitors used: 105°C 10000hrs
  15. Thermal switch Used: 100°C
  16. Rating Available: 1.2Amp, 1.4Amp, 1.8Amp, 2Amp, 2.4Amp, 2.8Amp & 3Amp

3261- up to 150watts

Higher wattage luminaires as well as drivers required to power them needs very close attention on their performance, as it's not just higher voltages and surges that damages LED Drivers, but higher temperatures also reduce their lifetime. Our 150watt driver delivers on both, electrical parameters as well as thermal parameters.

LED
  1. Dimensions Open Frame: 129mm X 101mm X 32mm
  2. Wide input range: 100 to 320VAC
  3. High voltage cutoff: @ 335VAC & Reconnect @ 310VAC
  4. Low Voltage cutoff: @ 90VAC & Reconnect @ 112VAC
  5. Maximum Voltage Sustainable: 440VAC
  6. Surge test: 5KV, in common and differential mode
  7. High-pot test: 3.78KV @ Input & Output, 1.5KV @ power & ground
  8. Power factor: greater than .95
  9. THD: less than 10%
  10. Efficiency: >87% at complete input range
  11. Other Protections: OVP, Short Circuit Protection
  12. Current accuracy: ±2.5%
  13. Capacitors used: 105°C 10000hrs
  14. Thermal switch Used: 100°C
  15. Rating Available: 2Amp, 2.4Amp, 2.8Amp, 3Amp & 3.5Amp

2602A- up to 30watts

LED
  1. Dimension:- Open Frame – 97mm X 34mm X 26mm/li>
  2. Dimension:-With Cabinate- 120mm X 37mm X 31mm
  3. Wide Input Range:100-320V
  4. High Voltage Cutoff : 325VAC
  5. Low Voltage Cutoff :105VAC
  6. Maximum Voltage Sustainable: 440
  7. Surger Test: 6KVA
  8. High pot test:
  9. Power Factor:Greater than .95
  10. THD: less than 10%
  11. Efficiency:greater than 87% at complete input range
  12. Other Protection : OVP,SCP
  13. Current Accuracy: +2.5%
  14. Capacitors Used: 105°C 10,000hrs

© Copyright 2019 Smooth Power. All Rights Reserved. | Design by: Nextconcept.in